Energy currents and tides (electrostatic transducer)

on 28 October 2012.

The amazing experiences we encounter in an entertaining physics. It does not matter, what's the book, no matter in which country issued. These experiments wander from book to book, from edition to edition. It seems that these experiments were carried out, or the dawn of civilization, and lead to some of the ancient sources of knowledge, or experience is so amazing authors that they are committed to their cause certainly in the works. Perhaps it is something fundamental, missed tunnel unused could have cried a necessity of implementation.

 One such experiment of children's books on physics always stunned author.

 The author offers with him to make sure that this amazing theme.


 A jet of water to which we offer can be electrified palochku.Palochka of grated on wool (silk) ebony, amber, glass, finally.

 Minimal props, playback is possible, even if not there one of these accessories.

 No wool or silk, you can use another fabric, in extreme cases, the hair. No tap water - it is possible to empty the cup.

 The result of the experiment: the jet deviates!

 How many times we offer a child a comb to shreds paper. Patches are drawn! How many people were on synthetics themselves (socks, T-shirts), and rue the day they bought them. How many times have we shot sweater and saw sparks. These experiments are not convincing, leave indifferent.

 But the deflected jet of water is impressive!

 Joffe once, the famous Soviet physicist, was passionate about it electrostatic generators of energy. And even born anecdote: the largest electrostatic station can only be built in China. Billion Chinese silk shorts to slide (fly) on the ebonite rod.

But when you see that the heavy stream of water is deflected (closes) to a charged wand, you feel amazed.

Now debriefing.

We can manage an electrostatic field with water? Yes! Jet has exactly the same effect on the charge? Yes, we can increase the flow of water? Yes! We can create other than rubbing the electrical field? Yes! We can, without direct contact (contact) with water to control it? Yes! We can no direct contact with the water to extract energy from the flow of Yes! That's really - YES!

Try to formulate the preliminary finding.

We can create powerful (strong) electric field and can control the flow of water. The water has a similar effect on the charged body. Water may be running as a river, or an incident, as in the waterfall. But management (energy exchange) will occur without any direct contact with water! No contact turbine wheels, screws. Something's come up, but direct contact is not required! We can extract energy without direct contact!

It is clear that the water in the electric field is polarized. Charge opposite to the Present, will be attracted. Oppositely charged - push off. Form a dipole. But for the dipole is not indifferent to the charge closer! Neighbors charges will attract stronger! And the whole mass will drag along. The more flux (deeper, bigger in size, wider), the greater will be the effect in the same presentation to the charge! Diverge further charges of dipoles, so they will respond better to the Present charge!

 Therefore, any electrically neutral body in charge of the presentation to polarize and attract Present charge! As pieces of paper, like hair, like a stream of water! Whoever doubts refer to the interaction of the dipoles to the interaction of the dipoles with the charge. Theory has been developed, tested, proven.

Clearly, you have to (must) get rid of the influence of the environment from direct contact with the liquid. It is clear that the mechanics had run. There is no device that would normally worked a long time, being immersed in the water (especially marine). This is not (impossible) ideal waterproofing it and fouling organisms, this enhanced corrosion and electrochemical processes is ... impossible! And this should be accepted: only completely isolated mechanism can work for a long time in such a hostile environment like water. The mechanism should work in a different environment (air, gas), but contact with water! Moreover, not directly, but through the fields!

So, as the author sees the construction of energy converter currents and tides. Sketch variant.

This wheel with blades. Mounting the wheel blades electrically isolated. Blade - conductors. The wheel is in the vicinity of water. Wheel is on a vertical shaft. While we consider this option. View from above.





  1 - the basic flow. 2 - wheel with paddles and equipment. 3 - the blades are connected to a voltage. 4 - blade without stress. 5 - the generator, gearbox and control gear.

 The blades are parallel to the water surface ey.Vsegda will only work half the blades, the second half will make idle. It's okay!

 The mechanism of action of the blades of the takov.Na high voltage is applied. Let the potential difference between the blade and the surface of the water 1000 000 Volt (one million volts). Distance from blade to let water 0.5 meters. This capacitor. Its capacity in the area of ​​10 square meters will be


wheree0диэлектрическая проницаемость вакуума permittivity of free space, 8,85*10-12 Farad / meter;

e - the dielectric constant of the medium, (=1);

S- capacitor area, m2 (10);

d- the distance between the blade and the water, m (0.5).

С=17,7*10-11 Farads.

Accumulated charges at voltages 1000 000 Volt:

Q=CU       Q=17,7*10-5 С=1,77*10-4 С

The strength of the interaction of two charges (the charge on the blades and the charge induced on the surface of the water):


F=9*109 *(1,77*10-4)2/0,25=1120 Newton 

 We will be able to rotate the generator. Not enough power - bring to the water or increase the area of ​​the blades.

 Now a million volts. To prevent run-off charges, the blades should be covered with a thin layer of a good insulator (varnish, paint, polymer). Necessary in the manufacture of blades (surfaces, plates!) Avoid sharp edges. We would like to put the entire structure in a sealed vessel filled with a gas that has other (better) dielectric properties than air. This will allow even closer to the water surface.

 In addition, we're able to zoom in and out, and stress. We can manage the process of changing the voltage!

 With broken blades will have to remove the charges. This is a waste. It is desirable to keep the charges, and only feed as utechki.No then you can go to the ancestors of the proven design water wheel with a horizontal axis. 







1 - the basic flow. 2 - wheel with paddles and equipment. 3 - upper arm (connected or disconnected). 4 - the lower blade (attached). 5 - generator, gearbox, control gear. 6 - container impermeable to water.

Of course, it is best to design sealed in a container (box, container). And drop the device in water, then not only the surface layer of the liquid will work, but in the process will involve a huge amount of environmental protection. Rising dramatically reduce blade interaction with the liquid, so the charge from them can not shoot. The blades are not installed across the flow and parallel to it! Capacity increases twice - now the blade interacts with the fluid on both sides. Interaction with depth (spatial, three-dimensional) dipoles increases. Dimensions of the vessel, which lowered the blade, are minimal.

And what size (presumably) be the blade?

The longer and narrower, the better. The more blades, the luchshe.Esli the blades that are close to lodge opposite charges, the better.

And what material to use for the blades? Is it just a guide?Not necessarily. If the charge does not apply just touch (connection), and with conductive brushes, you can use and a dielectric (insulator). You could try using a dielectric with a splash provodnika.Vozmozhnostey for experiments and tests - million.

This is not just a new energy converter, this new propulsion. This is an opportunity to create a driving force in the water and on land. Induction (point) charges on the surface of land or water will move a whole new mode of transport. Indeed, creating a moving vehicle in the charge that put things in the ground or water charges of opposite sign, we can move! Yes, and in the air is worth a try. And the phrase "moving charge" does not just mean moving the charge with the help of mechanical devices. It is quite possible to create a traveling electric field without mechanical parts.

And how many more you can think of measuring instruments?

For the museum, or cabinet of curiosities is to create a small horizontal shaft maket.Na impose six - seven-spoke plastic with metal plates at the ends. And all this is easy, elegant, beautiful like a toy. Let the set will stick to the charge, a piece of woolen cloth. Rubbed with a stick, the charge by one each plate. Installed next to the falling stream of water. Cool? Let then the child will think how to do better or umney. I assure you, he does it better than the author!